Eberspacher Easy start Select controller Airtronic or Hydronic heater | 221000341300

Part Number: 221000341300
Now £82.67 (ex. VAT) Was £140.12 (ex. VAT) Saving £57.45
Item in stock
Delivery from £8.49
Delivery Country:

Eberspacher Easy Start Select for Airtronic and Hydronic heaters.

Also suitable for latest generation S2 D2L heaters

Important information
This is only compatible with Airtronic and Hydronic heaters fitted with the latest version control unit. These are identified by the H-Kit logo displayed on the heater dataplate as shown in image 2 above.

Continuous running is only achievable with AIRTRONIC heater models. The Eberspacher EasyStart Select has a maximum run time of 1hr on HYDRONIC models. 

Please also view 'workshop menu' image for additional heater diagnostics and controller settings.

The new Eberspacher EasyStart Select is a temperature controller suitable for both Eberspacher Airtronic air & Hydronic water heaters.

  • Genuine Eberspacher EasyStart Select product
  • Suitable for both 12 volt or 24 volt installations
  • Comfortable room temperature control, heating & vent modes
  • Surface Mountable for ease of installation
  • Technical support and additional products available from Butler Technik

Workshop menu

To enter in the workshop menu press simultaneously the < and the > buttons for 5 seconds.

Then navigate in the menu where items are labelled from 1.1 to 6.4.

Fault codes retrieval

Heater must be switched on

1.1: displays the current fault code

1.2: displays the five last fault codes recorded - F1 to F5 using < or > buttons

Setting the operating time

4.1: before switching on the heater, select the value with < and > (Off or 10 to 720 min)

Dimensions:

Width:55 mm Height:46 mm Depth: 9mm

Supplied with the following:
EasyStart Select, mounting bracket, adhesive mounting pad, electrical connector housings & terminals
Installation & operating instruction manuals

Genuine Eberspacher 12 month warranty

Important information
This is only compatible with Airtronic and Hydronic heaters fitted with the latest version control unit. These are identified by the H-Kit logo displayed on the heater dataplate as shown in image 2 above

Compatible with the following Eberspacher air & water heaters

Air heaters
Eberspacher Airtronic D2
Eberspacher Airtronic D4
Eberspacher Airtronic D4S
Eberspacher Airtronic D5 

Eberspacher Airtronic S2 D2L

Water Heaters
Eberspacher Hydronic
Eberspacher Hydronic II
Eberspacher Hydronic II C
Eberspacher Hydronic II Comfort
Eberspacher Hydronic M II

 

We provide a wide range of secure payment options including Debit & Credit Card, PayPal (with interest free Pay-In-3), Amazon Pay, Gpay and ApplePay.

  • Asset 1

You can enjoy total peace of mind when you shop online with Butler Technik.

Our site uses a secure payment gateway that encrypts your credit or debit card information, ensuring total protection of your payment details throughout your purchasing experience.

You also have the options of paying using your Amazon account, Google Pay on your android phone or ApplePay on your Apple device.

Shopping at Butler Technik is always simple, safe and secure.

Please Note: Delivery prices quoted are excluding VAT.

Deliveries are made from Monday to Friday excluding Bank and National Holidays.

Next Working Day Shipping* is available in UK Mainland for all orders placed before 15:00hrs. Orders placed after 15:00hrs will be dispatched the following working day on a next day service.

Orders placed on a Saturday or Sunday will be despatched the following Monday (except Bank Holidays) for expected delivery following business day (Tuesday).

For Next Business Day Delivery, please select Next Day.

Standard 2-day shipping* is available to Scottish Highlands and Islands orders placed before 15:00hrs on stocked items. Items are despatched promptly sameday. UK Courier services are typically 2 day delivery for remote UK postcodes.

WEEKEND deliveries in the UK may be possible if required at additional cost. For WEEKEND delivery quotation please call our Sales Team prior*

Standard carriage / Free-shipping - please allow 2-5 working days from clearance of payment for delivery. Typically however delivery is much quicker and 98% of orders are delivered to UK addresses within 24 - 48 hours after dispatch from warehouse.

Delivery Times - Deliveries are made Monday to Friday (excl. public holidays) typically 2-5 working days from date of order for in-stock items if the FREE DELIVERY option is chosen. An email will be sent to inform you of dispatch of goods and due delivery date. Next Day UK delivery may be selected at checkout for an additional cost.

  • Free worldwide delivery will not be available if one of the following is applicable to your order:
  • Your order has a total weight exceeding 18kgs
  • You already have a discount code applied to your order
  • Your basket contains a special order item that requires shipping additionally.

Our returns policy does not include manufacturer warrantable items. Please speak to our support department or email sales@butlertechnik.com if you believe your item has failed within warrantable circumstances, or if you wish to return an item for refund.

Refunds and Right to Cancel

You have the right to cancel your order within a 14 (fourteen) day "cooling off period", which starts the day after you receive your items. You can apply for a refund within 30 (thirty) days from the date of invoice.

Prior Notification of Intent

If you wish to cancel an order or submit a refund request under the UK Consumer Protections (Distance Selling) Regulations 2000, you must inform ButlerBus Technik Ltd of your intention to cancel or return your order by either phone, email or post within the 14 (fourteen) day cooling off period for order cancellation, or 30 (thirty) day period for refunds.

When Butlerbus Technik has received your request you will receive confirmation and given authorisation to return goods. Please quote and include your original invoice number. All goods must be in a re-saleable condition.

You will be required to return goods at your cost by an insured and trackable method. If goods go missing we will only consider a request for refund on proof of completed receipt/delivery of goods to Butler Technik from your nominated courier. Once we have received goods we will then issue you a full refund less any delivery charges.

If you are unable to arrange a return please contact us. We can arrange collection on your behalf but a charge will be made which will be deducted from your refund total.

If a delivery charge was made on the original purchase this will not be refunded as this is a service which is concluded at the point of order.

Orders that have already been processed and/or dispatched cannot be cancelled; they must be returned to ButlerBus Technik Ltd for refund following receipt of goods by customer.

We will do our very best to assist and enable a quick refund process upon receipt of returned items.

Thank you for your continued understanding during this process

Returns address
FAO: RETURNS
ButlerBus Technik Ltd
Bridge Road
Aubourn
Lincoln
LN5 9FD
United Kingdom

    Specific Terms:
  • All costs relating to return shipping of correctly supplied goods shall be the responsibility of the purchaser.
  • ButlerBus Technik Ltd are not responsible for any shipping or insurance charges relating to return of goods.
  • Please be aware that ButlerBus Technik Ltd may NOT be able to accept for full or partial refund/credit any items that have been prior installed by the customer before return. Such goods/components shall be deemed 'used' and therefore unable for subsequent resale.
  • Specifically, but not exclusively, the return of prior installed electronic items used for purchaser diagnostic or trouble-shooting purposes shall not be considered for full refund.
  • The decision to refund or partially refund prior installed items shall remain solely at the discretion of ButlerBus Technik Ltd.
  • The decision to refund or partially refund goods returned beyond 30 days after original date of sale shall remain solely at the discretion of ButlerBus Technik Ltd.

Your statutory rights are unaffected by the above. Consumers other than Business trade customers are further protected by UK Consumer Protection (Distance Selling) Regulations 2000.

If you have any questions please ask our support department prior to returning any items.

I have this Easy start select control in my camper and it is for airtronic heater, but it only stays on for 60 min I have tried to change the program but with no results. Can you suggest a replacement controller Zac
Please see image showing workshop menu. It is possible to enter the workshop menu to adjust runtime above 60 mins ( section 4.1) but not possible to switch off the time restriction completely if you have a water heater. Only with an air heater is it permissible to not have a defined runtime.
View more
hi will this fit the airtronic d2 heater . also is this the continuous running controller . and also display current temperature in vehicle with out the use of a separate temperture sensor thanks malcolm Malcolm
Easy Start Select controller is compatible only with the later build ‘HKIT’ model D2 Airtronic. To check if your heater is ‘HKIT’, please look at the heater dataplate – see image
View more
hello, can I install a remote temp sensor with Eberspacher Easystart Select? I have been told it's not possible Jake
Easystart Select can easily be installed with temperature sensor. Please have a look at attached circuit daigram ( it's important always to connect grey/red and brown/white cables together from the heater harness, and then connect the sensor as shown
View more

Stock Alert

Please alert me via email when this product is back in stock.

Ask a question

Your name may be viewable as contributor - please leave blank if you wish to remain anonymous.

Please read our privacy policy for more information about how we protect your personal data.

Eberspacher Easy start Select controller Airtronic or Hydronic heater | 221000341300

£82.67 (ex. VAT)