new slither
US Dollars
Change VAT
Previous Image
Next Image
Pirelli CamFBC Catalyst Fluid - 5 litre
Hover over image to zoom.

Pirelli CamFBC Catalyst Fluid - 5 litre

Part Number: 5000000027
  • Offers Available
  • Free UK Delivery when you spend £90.00 +VAT
$173.90 (ex. VAT) (FREE UK Delivery)
( $208.68 (inc. VAT) inc. VAT)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Please also see our alternative product SATACEN 315

PIRELLI CAM FBC™ Fuel Borne Catalyst is the catalyst fluid for Pirelli Feelpure Diesel Particulate Filters for the London Low Emission Zone 2012.

Recommended for use by many Transport for London (TFL) Approved supplier Pirelli Eco Technology.

  • Pirelli Feelpure + Pirelli Feelpure AR

Diesel Particulate or Soot Filters are a highly efficient solution for controlling soot particle emissions to allow compliance with the London Low Emission Zone.

Diesel Particulate Filters typically reduce the number of ultrafine soot particles emitted from the tailpipe by between 99.0% and 99.9% - bringing exhaust gases up to very high air quality levels, allowing penalty/tariff free entry into the London Low Emission Zone. However, these filters will only remain efficient if the trapped soot can be disposed of during normal engine operation. If this does not occur regularly the filter will clog. This increases the backpressure from the exhaust and will ultimately prevent the engine running. Although there are a number of methods for regenerating a particulate filter, one of the most widely utilised and most cost-effective is to use a fuel borne catalyst. A fuel borne catalyst works by reducing the ignition temperature of the trapped soot, typically by more than 200°C . Typical vehicle temperature profiles can thus have comparatively short intervals circa 400°C for successful operation.

Pirelli CAM FBC™ fuel borne catalyst ensures complete and rapid filter regeneration by pre-catalysing the soot formed during combustion, with tiny particles of iron oxide. This ensures that any soot trapped in the filter will burn off at the lower temperatures typically encountered during normal engine operation. The filter is therefore regenerated during everyday driving without having to worry about filter clogging or damage. The cost and inconvenience associated with frequent filter removal and specialist cleaning can therefore be kept to a minimum.

Optimum dosing ratio for Pirelli CAM FBC™ is typically 1.5 ltr per 1000 ltr of diesel. This dosing ratio is usually configured into the Pirelli ECU parameters on initial installation and is not user adjustable.

Pirelli DPF systems are installed to consume Pirelli CAM FBC™ additive from new. However SATACEN 3™ (please see other items) has been formally tested and approved by the manufacturer, Pirelli Eco Technology, for demanding or cold climate applications. Prior to using SATACEN 3™ to substitute Pirelli CAM FBC™ however it is IMPORTANT to call us. Dosing ratios of the 2 products are very different. SATACEN 3™ may SAVE you money. Use 1 Litre of SATACEN 3™ equivalent 3 litres Pirelli CAM FBC™. Product dilution or Pirelli ECU parameter change MUST be performed prior to use in Pirelli Feelpure systems.

PIRELLI CAMFBC (ABRIDGED EXTRACT- PIRELLI SERVICE INFORMATION)

‘If a vehicle equipped with the system Pirelli Feelpure™ or Pirelli Feelpure™ AR and has to function for a long time in an environment with temperature below -15°C, Pirelli Eco Technology recommends the use of SATACEN 3™ additive, instead of CAM FBC™. SATACEN 3™......can be employed up to -39°C Optimum dosing ratio for SATACEN 3 is 0,5 liter to 1000 liters of fuel: it is different from the one of Pirelli CAM FBC (1,5 liters to 1000 liters of diesel)’

Please enquire for larger quantity or bulk purchase pricing. We at ButlerTechnik are specialists in the supply, maintenance, service and repair of commercial vehicle Diesel Particulate filters. If you are unsure of your requirements please call prior to purchase. Satacen 3 FBC fuel additive as listed is recommended for many Fuel Borne Catalyst systems to allow for correct function. If you have experienced poor performance from your London LEZ purchase please call for our free consultation.

Cross Reference

5000000027 - Pirelli Fuel additive for London LEZ Pirelli FEELPURE diesel Particulate filters

We have a number of secure payment methods throughout our website

including

Credit cards and Paypal logo

 

 

 

 

 

 

 

 

You can enjoy total peace of mind when you shop online with ButlerTechnik.

Our site uses Secure Server software that encrypts your credit or debit card information, ensuring total protection of your payment details throughout your purchasing experience

Shopping at www.butlertechnik.com is always simple, safe and secure

Please Note: Delivery prices quoted are excluding VAT.

UK Postage Table

 * UK Mainland only

Deliveries are made from Monday to Friday excluding Bank and National  Holidays.

Next Day Carriage * is available in UK Mainland for all orders placed before 15:00hrs. Orders placed after 15:00hrs will be dispatched the following working day on a next day service. For Next Day Delivery, please use the drop down menu under Shipping Options and select Next Day.

Standard 2-day shipping * is available to Scottish Highlands and Islands orders placed before 15:00hrs on stocked items. Items are despatched promptly sameday. UK Courier services are typically 2 day delivery for remote UK postcodes

WEEKEND deliveries in the UK may be possible if required at additional cost. For WEEKEND delivery quotation please call our Sales Team prior * 

Standard carriage / Free-shipping - please allow 2-5 working days from clearance of payment for delivery. Typically however delivery is much quicker and 98% of orders are delivered to UK addresses within 24 - 48 hours after dispatch from warehouse.

Delivery Times - Deliveries are made Monday to Friday (excl. public holidays) typically 2-5 working days from date of order for in-stock items if the FREE DELIVERY option is chosen. An email will be sent to inform you of dispatch of goods and due delivery date.  Next Day UK delivery may be selected at checkout for an additional cost.

CANCELLATIONS and RETURNS - from our Online shop

(not including manufacturer warrantable items. Please speak to our Sales department or email sales@butlertechnik.com if you believe your item has failed within warrantable circumstances)

You have the right to cancel your order within a 14 (fourteen) day "cooling off period", which starts the day after you receive your items.

If you wish to cancel under the UK Consumer Protections (Distance selling) Regulations 2000, you must inform ButlerBus Technik Ltd of your intention to cancel your order by either phone, email or post within the 14 (fourteen) day cooling off period.

You will then receive confirmation from ButlerBus Technik Ltd and given authorisation to return goods, please quote and include your original invoice number. We will only except goods back in a re-saleable condition.

Once we have received goods we will then issue you a full refund less any delivery charges. (You will be required to return goods at your cost by an insured and trackable method) If goods go missing we will only consider a

request for refund on proof of completed receipt/delivery of goods to ButlerTechnik from your nominated courier.

If you are unable to arrange a return please contact us. We can arrange collection on your behalf but a charge will be made which will be deducted from your refund total.

If a delivery charge was made on the original purchase this will not be refunded as this is a service which is concluded at the point of order. 

Orders that have already been processed and/or despatched cannot be cancelled; they must be returned to ButlerBus Technik Ltd for refund following receipt of goods by customer.

We will do our very best to assist and enable a quick refund process upon receipt of returned items.

Thank you for your continued understanding during this process

  
Returns address
ButlerBus Technik Ltd
Tillbridge Road Garage
Sturton-by-Stow
Lincoln
LN1 2BP
United Kingdom

All costs relating to return shipping of correctly supplied goods shall be the responsibility of the purchaser.

ButlerBus Technik Ltd are not responsible for any shipping or insurance charges relating to return of goods. 

Please be aware that ButlerBus Technik Ltd may NOT be able to accept for full or partial refund/credit any items that have been prior installed by the customer before return.

Such goods/components shall be deemed 'used' and therefore unable for subsequent resale.

Specifically, but not exclusively, the return of prior installed electronic items used for purchaser diagnostic or trouble-shooting purposes shall not be considered for full refund. 

The decision to refund or partially refund prior installed items shall remain solely at the discretion of ButlerBus Technik Ltd.

The decision to refund or partially refund goods returned beyond 14 days after original date of sale shall remain solely at the discretion of ButlerBus Technik Ltd.

Your statutory rights are unaffected by the above. Consumers other than Business trade customers are further protected by

UK Consumer Protection (Distance Selling) Regulations 2000